• 

  • Features banner arm and constructed of an aluminum telescopic pole that can adjust to three heights: 8.9ft, 13.1ft and 17.7ft
  • Custom print made of our proven flag fabric
  • Single-reverse or double-sided flag layout options
  • Event flag display will turn with the wind
  • Assembly is fast with easy-to-use spring buttons to secure the hardware at 3 set heights
  • Hardware set includes poles, pole clips, carrying case and flag weight
  • Your client can use the T-Pole® Basic Single Arm indoors and temporarily outdoors to promote an event and their sponsors or to support the home team at a tailgate party
  • The T-Pole® Basic Single Arm is a user-friendly flagpole solution, weighing 11lb and features a custom print that measures roughly 4’x12’. Prints are finished with a pole sleeve across the top and brass grommets along the side so it can be clipped and mounted to the hardware. Setting up this height-adjustable flagpole takes only minutes. Your client starts by connecting the banner arm to the telescopic pole. Then they mount the print, secure it to the hardware with the included banner arm and pole clips, and adjust the assembled flagpole to the desired height. This portable flagpole needs to be paired with one of our base options, such as the Water Base or the Cross Base 30”x30”/8lb, both used for indoor and outdoor displays. Optional accessories, like a Foldable Table as well as the Weight Bag 13gal for extra stability, can also be added to enhance your client’s flag display. The T-Pole® Basic is offered in several other styles, including the T-Pole® Basic Double Arm, T-Pole®Basic Parallel Arm, and T-Pole® Basic Triple Arm. For a freely height-adjustable flagpole check out our T-Pole® Plus.

  Print Size   3.8′ x 11.5′ Material Multiflag® – Knitted polyester fabric with excellent through print and high resistance to tearing

  Layout & Finishing

  • Single-reverse – Hemmed sides, left side finished with header tape wrapped in printed flag material and 7 grommets, top side finished with 1.25″ flat laid pole sleeve made of printed flag material
  • Double-sided – Two prints sewn together with a blocking inner liner, pillow-case style hemmed sides, left side finished with header tape wrapped in printed flag material and 7 grommets, top side finished with 1.25″ flat laid pole sleeve made of printed flag material

  HardwarePart Number   #H_TP00152 Height 8.9′ 13.1′ 17.7′ Weight 11.0lb

  Includes   Telescopic aluminum pole Aluminum banner arm Pole clips Flag weight Polyester carrying case

• 
  

ASSEMBLY INSTRUCTIONS

TECHNICAL SPECIFICATIONS

ARTWORK TEMPLATES