Available in smooth and cleated backing types. Please make sure to select the appropriate check box above.

Reproduction of fine details, shading and 3-D images is easily achieved with Logo Mats Inc.'s state-of-the-art digital printer.

100% premium rubber backing with long-wearing, static-dissipative nylon carpet for years of trouble-free performance.

Green friendly rubber backing has 10% -15% recycled content. Resists curling and cracking.

 Available with oil/grease resistant 100% Nitrile Rubber backing when applications call for additional protection.

LUTRADUR™ primary substrate creates a strong bond between the rubber and carpet.

All DigiPrint™ mats are certified slip resistant by the National Floor Safety Institute.

 

 

Surface
Fiber Type:	BCF Nylon, 4 x 4 twist, 2 ply twist/heatset
Height:	7/16 in.
Weight:	26 oz. per square yard (884 grams per square meter)
Construction:	Cut Pile
Backing
Primary Backing:	Non-woven Polyester
Secondary Backing:	100%SBR Rubber (20% Recycled content) Thickness: .060" Durometer: 60

 

Cleaning Instructions:

1. Vacuum Daily

Interior mats are constructed with either nylon or olefin surfaces designed to wipe residual soil, dust and moisture from shoes. They are most effective when used in conjunction with high performance entrance mats. They should be vacuumed daily using either a dry or wet/dry vacuum.

2. Routine Maintenance

As needed, interior mats should be cleaned and/or spot cleaned using a neutral cleaner followed by rinsing. If the mat becomes wet during the cleaning process, it should be allowed to dry thoroughly before returning to service. Nylon mats will require a longer drying period and should be positioned where they can drain during the drying process.

3. Deep Cleaning

Interior mats can be deep cleaned using any method used for carpeted floors. Logo Mats recommends using a neutral, solvent free cleaner if possible. In the event a solvent is used for removing oil, grease, or gum type spots, take care to thoroughly rinse the solvent from the mat before it is allowed to dry for return to service.

4. Floor Preparation

As with entrance mats, prior to the mat being put back into service, Logo Mats recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.